We Offer best prices on all sata products including :sata pcmcia card sata port sata cable card sata raid cards

PCI SLOT SAVER Technology TM Integrates Serial ATA RAID (1.5 Gbps), USB 2.0 (480Mbps) and IEEE 1394 (400Mbps) in one PCI Host Adapter to upgrade your computer to have all advanced features!

Serial ATA RAID PCi Host adapter

Provides Dual independent Serial ATA channels - Provides RAID 0 and RAID 1 - Provides Three IEEE 1394 ( FireWire ) ports (2 External + 1 Internal) - Provides Four USB2.0 / USB1.1 ports (3 External + 1 Internal) - Supports Windows drivers

SATA RAID + USB 2.0 + 1394a 3-In-1 9 Port PCI Host
Buy with 100% Satisfaction!
  • 1 unit: $69.98
  • 3 or more $65.98
  • 12 or more $61.98

QTY:     

Item # ST-203
Price: $69.98
Ship Weight: 1 lb.
Color: Red
Form Factor Low Profile
Chip Set:  
OS: Support: Windows
Driver:  
FAQ:  
In Stock: Yes
Compatibility: SATA, USB 2.0, IEEE 1394
Quantity Buy: Yes

FEATURES:
    1. PCI

  • Compliant with PCI Specification, revision 2.2
  • 32 bit, 33MHz fully compliant PCI host interface
  • Integrated PCI DMA engines


  • High Speed Serial ATA RAID

  • Dual high speed serial ATA interface ports, each supporting 1st generation Serial ATA data rates (1.5Gb/s)
  • Provides RAID 0 (Stripping) to greatly increase the performance of data transfer by simultaneously writing data to 2 drives
  • Provides RAID 1 (Mirroring) to protect the data from a disk failure by writing identical data on 2 drives
  • Fully compliant with Serial ATA 1.5G specifications
  • Independent 256-byte FIFOs (32 bit * 64 deep) per Serial ATA channel for host reads and writes
  • Supports Spread Spectrum in receiver
  • Features Serial ATA to PCI interrupt masking
  • Features Watch Dog Timer for fault resiliency
  • Acts as NON-RAID when BIOS not configured RAID

USB 2.0
  • Compliant with Universal Serial Bus Specification Revision 2.0 (Data Rate 1.5/12/480 Mbps)
  • Compliant with Open Host Controller Interface Specification for USB Rev 1.0a
  • Compliant with Enhanced Host Controller Interface Specification for USB Rev 0.95
  • Provides Four USB2.0 / USB1.1 ports ( 3 External + 1 Internal)
  • All USB ports can handle high-speed (480 Mbps), full-speed (12 Mbps), and low-speed (1.5 Mbps) transaction


  • IEEE 1394 ( FireWire )

  • Compliant with IEEE 1394 Open Host Controller Interface specification release 1.1 and IEEE Std 1394a-2000
  • Provides three 1394 ports at 100/200/400 Mbps
  • Built-in FIFOs for isochronous transmit (2048 bytes), asynchronous transmit (2048 bytes), and receive (3072 bytes)
  • 32-bit CRC generation and checking for receive/transmit packets
  • On Board DC Jack to have Extra power input from PC power supply



Back to Home Page      SATA Products      SATA II Products      eSATA Products          Help/Support